Hardware-Calibrated Dialect

SVG to G-Code for Carbide 3D Shapeoko CNC Router

Convert SVG vector outlines into high-feed toolpath G-code for Shapeoko 3, 4, and Pro machines. Pre-calibrated for rigid aluminum and wood routing.

ControllerCarbide Motion / GRBL

Feed Rate1500–2500 mm/min

Mode CommandM3 S18000 (Carbide Compact Router)

Privacy100% In-Browser

Drop SVG file here or click to browse

Processed in your browser · SVG/DXF up to 5 MB

⚡ Quick Machine Presets

Target Machine

Work Origin (0,0)

Units

SVG Source DPI

Feed Rate (mm/min)

Plunge Rate (mm/min)

Cut Depth (mm)

Pass Depth (mm)

Spindle Speed (RPM)

Spindle Dwell (sec)

Clearance Z (mm)

OperationTool diameter (mm)Tool position

Toolpath Preview

Cut Rapid

SVG origin is the bottom-left of the viewport. Explicit mm/in dimensions take priority; DPI scales pixel dimensions.

Setup & Zeroing Instructions for Shapeoko

Use the BitZero block to register material top and bottom-left origin.

Our tool embeds a safe 5mm retract clearance plane (G0 Z5) to clear hold-down screws.

Open the .nc or .gcode file in Carbide Motion, start the router, and run the job.

A clearance plane of 3mm to 5mm above the workpiece surface is standard to ensure rapid G0 traverses clear any low-profile clamping hardware.